Table 4-3 Parameters For The Hdd Tests - Sun Microsystems Ultra 20 M2 Service Manual

As well as choosing any of these tests, you can also define several parameters of the
test. You can change the parameters within the Test Settings option.
the options within Test Settings.
Parameters for the HDD Tests
TABLE 4-3
Option
Media Test Settings
Device Test Settings
Number of Retries
Maximum Errors
Check SMART First
HPA Protection
Exit
Description
Enables you to select the test time duration, the
percentage of the hard disk to test, and the sectors to
be tested on the hard disk.
Enables you to select the test time durations of the
devices and the test level.
Enables you to select the number of times to retry
testing a device before terminating the test.
Enables you to select the number of errors allowed
before terminating the test.
SMART stands for Smart Monitoring Analysis
Reporting Test. SMART-enabled drives provide
predictive failure analysis and diagnostic information.
HPA stands for Host Protected Area.
Exits the menu.
Chapter 4 Running Diagnostics
gives
TABLE 4-3
4-7