Planning The Installation Process; Figure; Process Flow For Setting Up The Sun Ultra 20 M2 Workstation; Section 2.1, "Planning The Installation Process - Sun Microsystems Ultra 20 M2 Service Manual

2.1

Planning the Installation Process

Use the following flowchart to assist you with installing the Sun Ultra 20 M2
Workstation.
Configure the preinstalled Solaris 10

FIGURE 2-1

2-2 Sun Ultra 20 M2 Workstation Service Manual • January 2007
START
Unpack the workstation and
familiarize yourself with the
workstation features.
Install
optional
components?
No
Connect the workstation and
external device cables.
Power on the workstation.
Configure
preinstalled
OS
software?
Yes
Operating System.
READY TO WORK!

Process Flow for Setting Up the Sun Ultra 20 M2 Workstation

See Chapter
Install
Yes
optional
components.
See Section 2.4, "Powering On the
Workstation" on page
No
Install your
OS.
See the Sun Ultra 20 M2 Workstation
Installation Guide.
1.
To install DIMMs, a graphic
accelerator, PCI/PCI-E
cards, hard drives, or a
DVD drive, see Chapter
Section 2.3, "Connecting
See
External Devices to the
Workstation" on page
2-6.
To install an optional,
supported OS, see the Sun
Ultra 20 M2 Workstation
Operating System Installation
Guide.
2.
2-4.