Planning The Installation Process - Sun Microsystems Ultra 40 Setup Manual

Planning the Installation Process

Use the following flowchart as a process tool to assist you with installation of the
Sun Ultra 40 Workstation.
Unpack the workstation and familiarize
yourself with the workstation features.
Connect the workstation and external device
cables.
Power on the workstation.
Configure the preinstalled operating system
or install another operating system.
If necessary, install the supplemental drivers
from the Sun Ultra 40 Workstation
Supplemental CD.
If necessary, enable the secondary
PCI-Express card.
FIGURE 1-1
2 Sun Ultra 40 Workstation Setup Guide • February 2007
START
Yes
Install optional
components?
No
READY TO WORK!
Process for Setting Up the Sun Ultra 40 Workstation
See "Package Contents Inventory" on page 3
"Front and Back Panel Overview" on page
To install DIMMs, graphic
accelerators, PCI cards, hard
Install
drives, tape drives, or
optional
CD or DVD drives, see the Sun
.
components
Ultra 40 Workstation Service,
Diagnostics, and Troubleshooting
Manual or the component
documentation.
See "Cabling the Workstation" on page
See "Powering On the Workstation" on page
See "Setting Up the Software" on page
See "Installing an Additional Operating System
and Drivers" on page 10.
See "Enabling the Secondary PCI-E Graphics
Card" on page 13.
and
4.
6.
7.
8.