Table of Contents
Advertisement
Trap Log
Top Talkers
3-46
T 1 A c c e s s R o u t e r
Button
Function
Error Inject
Injects a bit error.
Reset Errors
Resets the current error count.
Loop Submit
Sets the type of Loop test.
The Trap Log screen (Figure 3.36) shows a collection of all the traps that
have been generated. A trap is a mechanism that permits a device to send an
alarm for certain network events to an SNMP management station; in other
words, traps are notifications of triggered alarms.
The table shown in this screen lists each trap by its Index number, and
displays the type of error captured by the trap (Trap Number), the date and
time the trap was stored (Time Stamp), its description, and its value.
To remove all trap information stored in memory, click the "Delete All
Traps" button.
Figure 3.36
Trap Log Screen
Clicking on the Top Talkers link in the navigation tree displays a screen
(Figure 3.37) where you can set parameters for and initiate the generation of a
list of IP addresses ranked in terms of the number of frames and octets they
have transmitted during a specified reporting period. This report allows MIS
managers to determine who is generating the most traffic on a WAN based on
IP addresses.
Advertisement
Table of Contents
