Endpoint Service Details Screen; Dlci Details Screen - Verilink T1 Reference Manual

Protocol Encapsulation
The Endpoint Details screen provides the following user-activated buttons:
Button Function
Submit Sets any values that have been changed.
Service Details Opens the Service details screen showing the selected service's
settings.
DLCI Details Displays details of the selected DLCI.
Delete Endpoint Deletes the currently displayed endpoint.

Endpoint Service Details Screen

Clicking on the "Service Details" button at the bottom of the Endpoint Table
screen displays the typical Service Details screen. Refer to Service Details
Screen on page 3-14 for a complete description of this type of screen.

DLCI Details Screen

The DLCI Details screen (Figure 3.27) lets you access the configuration
parameters described in the paragraphs below. To bring up this screen, click
on a specific DLCI under the "DLCI" column on the Endpoint Table screen,
or on the "DLCI Details" button on the Endpoint Details screen.
Figure 3.27 DLCI Details Screen
The unit uses the first three configuration parameters (Protocol Encapsulation,
Proprietary Traffic Type, and Proprietary Offset) to gather statistics. For in-
band management, "RFC 1490" must be the encapsulation method.
Type of encapsulation used by the FRAD/Router connected to the unit.
Values: RFC 1490, Proprietary
Default: RFC 1490
W e b S e r v e r I n t e r f a c e 3-33