Table of Contents
Advertisement
IP Entry Timer
TCP Connection Timer
TCP Closing Timer
TCP Disconnected
Timer
TCP Sequence Delta
Timer
UDP Timer
ICMP Timer
3-64
T 1 A c c e s s R o u t e r
The maximum time (in seconds) NAT will use resources when not using
TCP, UDP, or ICMP.
Values: 0−65535
Default: 120
The maximum time (in seconds) NAT will use resources when attempting to
establish a TCP connection.
Values: 0−65535
Default: 300
The maximum time (in seconds) NAT will use resources when attempting to
close a TCP connection.
Values: 0−65535
Default: 0
The maximum time (in seconds) NAT will use resources when attempting to
disconnect from TCP.
Values: 0−65535
Default: 120
The maximum time (in seconds) NAT will use resources when managing TCP
Packet Sequencing.
Values: 0−65535
Default: 180
The maximum time (in seconds) NAT will use resources for a UDP port in
use.
Values: 0−65535
Default: 120
The maximum time (in seconds) NAT will use resources for any ICMP
request.
Values: 0−65535
Default: 120
The NAT Details screen provides the following user-activated buttons:
Button
Submit
Static TCP Translation Table
Static UDP Translation Table
NAT Port Table
Function
Sets any values that have been changed.
Allows static mapping of global TCP Server ports to
a local host IP address/port combination.
Allows static mapping of global UDP Server ports to
a local host IP address/port combination.
Defines NAT global/Internet and local/corporate
ports.
Advertisement
Table of Contents
