Table of Contents
Advertisement
Rate
Service
Idle Pattern
Frame Relay Service Details Screen
Figure 3.16
Channel Table Details Screen
The Channel Table Details screen lets you establish the Rate, Service, and
Idle Pattern parameters for any available channel. The screen parameters are
described below.
The unit can operate at any data rate that is a multiple of 56 or 64 kbps.
Values: 56K, 64K
Default: 64K
Specifies the service to which this channel is allocated. Refer to the Service
Table to see how the current services are configured.
Selects the DS0 idle pattern sent by the unit and lets the unit determine if the
DS0 idle pattern has been sent by the other end.
Values: 0−255
Default: 127
Click on "Frame Relay" under the "Type" column on the Services screen to
access the Frame Relay Service Details screen (Figure 3.17). This screen lets
you access the configuration parameters described in the paragraphs below.
W e b S e r v e r I n t e r f a c e
3-17
Advertisement
Table of Contents
