Verilink T1 Reference Manual page 195

loading MIBs may vary from one platform to another, the following basic steps
are the same.
1
The SNMP manager has a directory for MIBs. Copy the files
ds8200tc.mib ,
and hdsl2.mib into this directory. The MIBs use a
router.mib ,
DOS format; therefore, a DOS2UNIX command may have to be used for
UNIX workstations (typical directories are snmp_mibs for HP's
â
OpenView , bin for Sun's NetManager
Rock Computing's SNMPc
2
Start the SNMP manager if it is not already running. Select one of the
menu selections (or selection subheadings) that contains the SNMP MIB
operations (this is Options subheading for HP OpenView and Config
subheading for SNMPc).
3
Choose the option for LOADING or COMPILING MIBs. You must
specify which MIBs to load.
4
Once the manager has successfully loaded the MIBs, you are ready to
manage the Verilink product. If you have any questions please call
Verilink Product Support.
ds8200v2.mib , ipadv2.mib
ä
ä
).
, ipstart.mib
, and mibfiles for Castle
S N M P A g e n t
,
B-3