Simple Mail Transfer Protocol (Smtp) - Verilink T1 Reference Manual

Simple Mail Transfer Protocol (SMTP)

Mail Server IP Address
Domain Name
Mail From
Recipient 1...5
Use the SMTP Details Screen (Figure 3.77) to configure the SMTP function
of the T1 Access Router. SMTP is used to forward notification of events to a
user-definable list of up to five recipients. The even notification is sent as an
e-mail in the following format:
From: T1 Access Router@verilink.com
To: Event Receiver
Subject: Even Notification
IP Address: 192.168.60.157
System Up Time: 0 days, 01:20:02
System Name:
System Location:
System Contact:
Reporting the following event:
OOFS Threshold Exceeded, ifIndex 3, Count 5
The parameters associated with the SMTP Details screen are described below.
Figure 3.77 SMTP Details Screen
IP address of the mail server to which notifications will be sent.
Name of domain where the device resides (i.e., Verilink.com)
E-mail address of the device (T1 Access Router). While the device will not be
able to retrieve e-mail from a service, the mail needs to have the "From"
address filled in.
NOTICE:
There can be no blank space(s) in the "Mail From" address.
E-mail addresses of recipients of event notifications (i.e., sales@verilink.com
or support@verilink.com).
W e b S e r v e r I n t e r f a c e 3-77