Table of Contents
Advertisement
Mail Server IP Address
Domain Name
Mail From
Recipient 1...5
Encryption
TFTP Configuration
Figure 4.75
SMTP Details Screen
IP address of the mail server to which notifications will be sent.
Name of domain where the device resides (i.e., Verilink.com)
E-mail address of the device (WANsuite). While the device will not be able to
retrieve e-mail from a service, the mail needs to have the "From" address
filled in.
NOTICE:
There can be no blank space(s) in the "Mail From" address.
E-mail addresses of recipients of event notifications (i.e., sales@verilink.com
or support@verilink.com)
Encryption is not available on this unit.
A Trivial File Transfer Protocol (TFTP) service on a server can provide
remote file access to the FrameStart FSM to
•
Update the firmware
•
Save the configuration setup
•
Restore a saved configuration setup
To transfer a file to or from a TFTP server from a FrameStart FSM unit, you
must indicate the TFTP server's IP address and file name, and then perform a
"Get" operation to receive a file from the server, or a "Put" operation to send
a file to the server. The file name and its extension determine the type of file
transferred.
V T 1 0 0 I n t e r f a c e
4-77
Advertisement
Table of Contents
