Parameters To Negotiate - Verilink T1 Reference Manual

Access router
Table of Contents

Advertisement

Initiate Negotiation
Determines whether the port actively negotiates with the peer site or passively
waits for negotiation requests.
Allow PAP
Lets the peer to negotiate for PAP.
Allow CHAP
Lets the peer to negotiate for CHAP.
PAP Username
This field is used to log on to the peer. Type the appropriate PAP Username
in this field.
PAP Password
Enter the password necessary to log on to the peer under a given PAP
Username.
CHAP Username
Type the appropriate CHAP Hostname in this field.
CHAP Secret
Enter the Secret (i.e., password) necessary to challenge the peer.

Parameters To Negotiate

The table displayed near the bottom of the PPP Service Details screen shows
which parameters are set to be negotiated. You can specify which parameters
should be negotiated by clicking on the pull-down menu next to each
parameter and selecting the desired option. Parameters that can be negotiated
are described below.
Parameter
Protocol Header
Compression
IPCP (IP Control
Protocol)
Compression
Values: Yes, No
Default: Yes
Values: No, Yes
Default: No
Values: No, Yes
Default: No
Values: User established
Default: Username
Values: User established
Default: None
Values: User established
Default: Hostname
Values: User established
Default: Secret
Description
Compresses PPP protocol headers.
Default = Yes
Compresses TCP headers using Van Jacobsen compression.
Default = Yes
W e b S e r v e r I n t e r f a c e
3-25

Advertisement

Table of Contents
loading

Table of Contents