Table of Contents
Advertisement
CIR Alarm
Bits Over Be Threshold
Bits Over Be Alarm
Congestion Threshold
Congestion Alarm
BECN in CIR
UAS Threshold
UAS Alarm
3-36
T 1 A c c e s s R o u t e r
Reports if the Tx over CIR threshold has been exceeded.
Sets the Tx over Be alarm threshold. This threshold is the number of bits per
second in excess of CIR + Be during a 15-minute interval. Setting this field to
"0" (zero) disables the alarm.
Reports if the Tx over Be threshold has been exceeded.
Sets the Rx Congestion alarm threshold. This threshold is the number of
frames received with BECN/FECN. Setting this field to "0" (zero) disables
the alarm.
Reports if the Rx Congestion threshold has been exceeded.
Reports if Backward Explicit Congestion Notification (BECN) has been
received within CIR.
Sets the Unavailable Seconds (UAS) alarm threshold. This threshold occurs
after the DLCI is unavailable for a specified number of seconds. Setting this
field to "0" (zero) disables the alarm.
Reports if the UAS threshold has been exceeded.
The DLCI Details screen provides the user-activated buttons defined below.
Button
Function
Submit
Sets and activates newly defined DLCI parameters.
Clear Alarms
Clears all DLCI alarms.
DLCI Statistics
Displays a table of the statistics for this DLCI.
DLCI Table
Displays a table of all DLCIs on a specific frame relay service, with
their state and alarm conditions.
DLCI Statistics Screen
Clicking the "DLCI Statistics" button on the DLCI Details screen will display
a summary (Figure 3.28) of the Transmit, Receive, and Performance statistics
for the selected DLCI for a specific period.
Advertisement
Table of Contents
