Table of Contents
Advertisement
Supervisory
Speed
Character Size
Diagnostic Messages
Parity
Figure 3.11
Unit Access Details
The Supervisory interface's screen (Figure 3.12) displays the current speed of
the Supervisory port interface and other parameters as described below.
Figure 3.12
Supervisory Screen
Click on the "Supervisory Services" button at the bottom of the screen to
view service information for the Supervisory interface.
Changes the Supervisory port speed (in bits per second).
Values: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Default: 19200
Selects the number of bits required to make up one asynchronous character.
Values: Five, Six, Seven, Eight
Default: Eight
Enables the Supervisory port to send out diagnostic messages upon power-up.
Values: Enable, Disable
Default: Enable
Sets the parity bit.
Values: None, Odd, Even
Default: None
W e b S e r v e r I n t e r f a c e
3-13
Advertisement
Table of Contents
