Verilink T1 Reference Manual page 132

ACCM
MRU
Port IP Address
Peer IP Address
Virtual PPP Over
Auth Challenge
Interval
Allow PAP
Allow CHAP
PAP Username
PAP Password
CHAP Username
4-24 T 1 A c c e s s R o u t e r
The Asynchronous Control Character Map (ACCM) configuration option
provides a method to negotiate the use of control character transparency on
asynchronous links.
Values: 0–4294967295
Default: 4294967295
The Maximum Receive Units (MRU) configuration option may be set to
inform the peer that the implementation can receive larger packets, or to
request that the peer send smaller packets.
Values: 128–4096
Default: 1500
The IP Address of the port. For unnumbered PPP link, set to 0.0.0.0 and set
IP Address Negotiation to "No."
Default: 192.168.1.2
Enter the IP address of the peer that will negotiate authentication protocols.
Default: 192.168.1.3
Endpoint name over which to send PPP encapsulated data (i.e., PPP over
Frame Relay). Valid only when the PPP interface is Virtual.
The time interval (in seconds) between CHAP challenges. A value of "0"
(zero) disables the periodic authentication challenge.
Values: 0−3600
Default: 0 (disabled)
This parameter lets the peer negotiate for PAP.
Values: No, Yes
Default: No
This parameter lets the peer negotiate for CHAP.
Values: No, Yes
Default: No
Type the appropriate PAP Username in this field to log on to the peer.
Values: (User Established)
Default: Username
Enter the password necessary to log on to the peer under a given PAP
Username.
Values: (User Established)
Default: (None)
Type the appropriate CHAP Hostname in this field to challenge the peer.
Values: (User Established)
Default: Hostname