Table of Contents
Advertisement
Figure 3.26
Name
When the unit learns a new DLCI, it creates an endpoint entry and a DLCI
entry if they are not already configured. The endpoint's Name will
automatically be assigned as "Dynamic"; however, this name can (and most
likely should) be changed to reflect a remote location name. Submitting a
changed Name parameter will cause the endpoint entry and its corresponding
DLCI entry to be saved in the configuration database.
CAUTION:
Service
The Service Index number (from the Service Table) on which this DLCI was
found or configured.
DLCI
The DLCI number.
Forward Endpoint
By default, each DLCI is switched to its pair service in the Service Table
using the same DLCI number. If this endpoint has to be switched to a
different DLCI or a different service, the endpoint index of the destination
must be configured here.
For most applications, you will not need to set this parameter.
Endpoint Details Screen
Value:
A string of up to 11 characters
Default: None
When configuring endpoints, the name you assign each endpoint in
the Name parameter field must be unique within the unit.
Values: Displays the currently active Services (by index number) or the
Service(s) on which the DLCI was discovered.
Default: 0
Values: 16–1023
Default: 0
Values: 0–256
Default: 0
W e b S e r v e r I n t e r f a c e
3-31
Advertisement
Table of Contents
