Verilink T1 Reference Manual page 182

Enable
Endpoint
4-74 T 1 A c c e s s R o u t e r
The Bridge Details screen provides the following user-activated prompts:
Prompt Function
Bridge Port Table Displays the Bridge Port Table screen (Figure 4.72) that lets
the user access and configure the Bridge Port Details screen
(Figure 4.73).
Bridge Lookup Table Displays the Bridge Lookup Table screen (Figure 4.74) that
contains all MAC Addresses learned by the Bridge.
Figure 4.72 Bridge Port Table
The Bridge Port Table screen lets you view the parameters described below
the Bridge Port Details screen. Clicking on a number in the "Index" column
of the Bridge Port Table will bring up the Bridge Port Details screen, which
displays, and, in some cases, lets you change, the parameters described below.
Figure 4.73 Bridge Port Details
Enables or disables Bridging on this port.
Endpoint name.