Table of Contents
Advertisement
Figure 3.44
Endpoint
Endpoint name (or Interface) through which to send the IP packet to reach the
defined IP Address. The default is the LAN.
IP Address
The IP address of the unit for which you want to define the MAC address.
MAC Address
The MAC address of the host to be reached.
ARP Status
Displays whether this static ARP is enabled or disabled.
The Static ARP Table screen provides the following user-activated buttons:
Button
Dynamic ARP Table
Add New
ARP Details Screen
Access this screen by clicking on the appropriate number under the "Index"
column on the ARP Table screen.
Figure 3.45
Endpoint
Endpoint name (or Interface) through which to send the IP packet to reach the
defined IP Address. Currently, this is always the LAN.
IP Address
IP address of the circuit.
Values: 0.0.0.0−255.255.255.255
Default: 0.0.0.0
ARP Table Screen
Function
Displays the dynamically learned MAC <-> IP address.
Adds a new static ARP.
ARP Details Screen
W e b S e r v e r I n t e r f a c e
3-55
Advertisement
Table of Contents
