Table of Contents
Advertisement
Allow PAP
Allows the peer to negotiate for PAP.
Allow CHAP
Allows the peer to negotiate for CHAP.
PAP Username
This field is used to log on to the peer. Type the appropriate PAP Username
in this field.
PAP Password
This field is used to enter the password necessary to log on to the peer under
a given PAP Username.
CHAP Username
This field is used (along with the CHAP Secret) to challenge the peer. Type
the appropriate CHAP Hostname in this field.
CHAP Secret
This field is used to enter the Secret (i.e., password) necessary to challenge
the peer.
Initiate Negotiation
Determines whether the port actively sends negotiation requests to the peer
site or passively waits for negotiation requests.
Parameters To Negotiate
The table displayed near the bottom of the PPP Service Details screen shows
which parameters are set to be negotiated. You can specify which parameters
should be negotiated by clicking on the pull-down menu next to each
parameter and selecting the desired option. The table below describes the
parameters that can be negotiated.
Parameter
Protocol Header
Compression
IPCP (IP Control
Protocol)
Compression
MRU (Maximum
Receive Units)
Values: No, Yes
Default: No
Values: No, Yes
Default: No
Values: User established
Default: Username
Values: User established
Default: None
Values: User established
Default: Hostname
Values: (user established)
Default: Secret
Values: Yes, No
Default: Yes
Description
Compresses PPP protocol headers.
Default = Yes
Compresses TCP headers using Van Jacobsen compression.
Default = Yes
Informs the peer that the implementation can receive larger
packets, or to request that the peer send smaller packets.
Default = Yes
W e b S e r v e r I n t e r f a c e
3-23
Advertisement
Table of Contents
