Frame Relay Service Details Screen - Verilink WANsuite 5330 Reference Manual

Frame Relay Service Details Screen

Interface Type
Link Management
3-16 W A N s u i t e 5 3 3 0
Figure 3.12 Channel Table Details Screen
Click on "Frame Relay" under the "Type" column on the Services screen to
access the Frame Relay Service Details screen (Figure 3.13), which lets you
access the configuration parameters described in the paragraphs below.
Figure 3.13 Frame Relay Service Details Screen
If this service is connected to a Frame Relay network, the Interface Type
should be set to "UNI" as it is the user side of a User-to-Network interface. If
it is connected to a FRAD/Router, the Interface Type should be set to "NI" as
it is the network side of a User-to-Network interface. If it is connected to an
equipment set for Network-to-Network interface, the Interface Type should be
set to "NNI."
Values: UNI, NI, NNI
Default: UNI if interface is Network, NI if interface is Serial
This parameter should be set to the link management used by the equipment
connected to it. If set to "Auto," the unit will learn the link management type
and display it on the status portion of this screen.