ZXR10 8900 Command Manual (DPI Volume)
Parameter
Description
Example
Command
Function
Command Mode
Command Format
Parameter
Description
Example
Command
Function
24
Confidential and Proprietary Information of ZTE CORPORATION
Parameter
<subservice-id>
To enter service configuration mode and add subservice 12 to ser-
vice 2, execute the following command:
ZXR10(config-dpi)#service 2
ZXR10(config-dpi-service-2)#add subservice 12
Command import
subservice
Under current service, import another subservice to one subser-
vice. Command no can be used to delete the subservice.
Service configuration mode with prompt to be
.
n)#
import subservice <subservice-id> im_subservice <im_subse
rvice-id>
no import subservice < service-id> im_subservice <im_subs
ervice-id>
Parameter
<subservice-id>
<im_subservice-id>
To enter service configuration mode and import subservice 10 to
subservice 12 under service 2, execute the following command:
(Note: Both subservice 10 and subservice 12 must be in one ser-
vice.)
ZXR10(config-dpi)#service 2
ZXR10(config-dpi-service-2)#import subservice
12 im_subservice 10
Command bind flow-pool
This binds flow-pool with current service and uses it as default
policy of this service. Command no can be used to delete this
binding.
Description
It is the id of subservice entry, ranging from
1 to 8191.
Description
It is the id of subservice entry, ranging from
1 to 8191.
It is the id of subservice entry, ranging from
1 to 8191.
ZXR10(config-service-