Command Update Dpi-Log - Zte ZXR10 8900 Series Command Manual

Parameter
Description
Example
Command
Function
Command Mode
Command Format
Parameter
Description
Example
Parameter
<slot-id>
<time-interval>
To set interval of log auto upload to 10, execute the following com-
mand:
ZXR10(config-dpi)#upload interval 4 10

Command update dpi-log

It is available to upload log individually or in batch when uploading
it manually.
DPI configuration mode
update dpi-log <slot-id><server-dir-name><server-file-name
><local-dir-name/local-file-name>
Parameter
<slot-id>
<server-dir-name>
<server-file-name>
<local-dir-name>
<local-file-name>
Uploading log individually:
200811260023.dat to file 200811260023.dat under root directory
of server, execute the following command:
ZXR10(config-dpi)#update dpi-log 4 / 200811260023.dat /sata
/20081126/200811260023.dat
Uploading log in batch: To upload local log files 20081126*.dat
to files *.dat under root directory of server, execute the following
command:
ZXR10(config-dpi)#update dpi-log 4 / *.dat
/sata/20081126/*.dat
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 8 New Commands in DPI Config Mode
Description
It is the slot number where interface card
locates, ranging from 1 to 12.
It is the interval, ranging from 2 minutes to
60 minutes.
Description
It is the slot number where interface card
locates, ranging from 1 to 12.
It is the directory name on server.
It is the name of file on server.
It is the name of local directory.
It is the name of local file.
To upload local log file
37