Command Show Subservice - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Command Manual (DPI Volume)
Command Mode
Command Format
Parameter
Description
Example
Command
Function
Command Mode
Command Format
Parameter
Description
Example
22 Confidential and Proprietary Information of ZTE CORPORATION
Subservice configuration mode with prompt to be
service-n)#
aging-time <time>
Parameter
<time>
To enter subservice configuration mode and set aging time to 10
for subservice 2, execute the following commands:
ZXR10(config-dpi)#subservice 2
ZXR10(config-dpi-subservice-2)#aging-time 10
Command show
subservice
This shows configuration of designated subservice. It shows signa-
ture symbols added under subservice, flow-pool bound with sub-
service, other policies and aging time.
All modes
show subservice <sub-service -id>
Parameter
<sub-service -id>
To show configuration of service 2, execute the following com-
mand:
ZXR10(config-dpi)#show subservice 2
subservice-id flowpool-id
-------------------------------------------------
2 12
add protocol string:
-------------------------------------------------
add signature symbol string: 10 20
-------------------------------------------------
Description
It is aging time, ranging from 1 to 265 (actual
range is 2-510), in minutes, 2min by default.
Description
It is the id of subservice entry, ranging from
1 to 8191.
action agingtime
permit 1 * 2
ZXR10(config-sub-