Configuring Dpi Template; Command Dpi-Template; Command Bind Slot - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Mode
Command Format
Parameter
Description
Example
Command
Function
Command Mode
Command Format
7
C h a p t e r
Configuring DPI
Template
Table of Contents

Command dpi-template ...................................................27

Command bind slot .........................................................27

Command bind service ....................................................28
Command bind sip-addr ..................................................28
Command bind switchport ..............................................29
Command show dpi-template ..........................................30
Command dpi-template
This enters dpi-template configuration mode.
DPI configuration mode with prompt to be
dpi-template <template-id >
Parameter
<template-id >
To enter dpi-template configuration mode, execute the following
commands:
ZXR10(config)#dpi-template 2
ZXR10(config-dpi-template-2)#
Command bind slot
Bind direction rules of data flow in current DPI-template. Com-
mand no can be used to delete this binding.
DPI-template configuration mode with prompt to be
dpi-template-n)#
bind slot <slot-id>
Confidential and Proprietary Information of ZTE CORPORATION
Description
It is id of dpi-template entry, ranging from 1
to 4095. 0 indicates this dpi-template entry
is invalid.
ZXR10(config)#
ZXR10(config-
27