Configuring Service; Command Service; Command Add Subservice - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Mode
Command Format
Parameter
Description
Example
Command
Function
Command Mode
Command Format
6
C h a p t e r

Configuring Service

Table of Contents

Command service ............................................................23

Command add subservice ...............................................23

Command import subservice ...........................................24
Command bind flow-pool ................................................24
Command show service ..................................................25
Command service
This enters service configuration mode. Command no can be used
to clear the configuration.
DPI configuration mode with prompt to be
service <service-id>
no service < service-id>
Parameter
<service-id>
To enter service configuration mode, execute the following com-
mand:
ZXR10(config-dpi)#service 2
ZXR10(config-dpi-service-2)#
Command add subservice
This adds one subservice to current service. Command no can be
used to delete the subservice.
Service configuration mode with prompt to be
.
n)#
add subservice <subservice-id>
no add subservice < service-id>
Confidential and Proprietary Information of ZTE CORPORATION
Description
It is id of service entry, ranging from 1 to
2047. Before ip/port/vlan is bound with
service, service 0 is bound by default.
ZXR10(config)#
ZXR10(config-service-
23