Command
Function
Command Mode
Command Format
Parameter
Description
Example
3
C h a p t e r
Configuring Signature
Symbol
Table of Contents
Command signature-symbol ...........................................11
Command add signature-entry ........................................12
Command set hit-limit -num ...........................................12
Command show signature-symbol ..................................13
Command signature-sym
bol
This enters signature symbol configuration mode. Command no
can be used to clear the configuration.
DPI configuration mode with prompt to be
signature-symbol <signature-symbol-id>
no signature-symbol <signature-symbol-id>
Parameter
<signature-symbol-
id>
To enter signature symbol configuration mode, execute the follow-
ing command:
ZXR10(config-dpi)#signature-symbol 2
ZXR10(config-dpi-signature-symbol-2)#
Confidential and Proprietary Information of ZTE CORPORATION
Description
It is the id of signature symbol, ranging from
1 to 8191. 6144-8191 is reserved and cannot
be configured by user. 0 indicates the id is
invalid.
ZXR10(config-dpi)#
11