Command Add Protocol - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Command Manual (DPI Volume)
Command Mode
Command Format
Parameter
Description
Example
Command
Function
Command Mode
Command Format
Parameter
Description
Example
20 Confidential and Proprietary Information of ZTE CORPORATION
Subservice configuration mode with prompt to be
.
subservice-n)#
add signature-symbol <signature-symbol-id-relation>[relatio
n-name]
no add signature-symbol <signature-symbol-id-relation>
Parameter
<signature-symbol-id
-relation>
[relation-name]
To enter subservice configuration mode, add signature-symbol-re-
lation 1/2/3/4 for subservice 2, specify name AAA for the option,
execute the following commands:
ZXR10(config-dpi)#subservice 2
ZXR10(config-dpi-subservice-2)#add
signature-symbol 1/2/3/4 AAA

Command add protocol

This adds one signature symbol application for current subservice.
Command no can be used to delete this signature symbol appli-
cation.
Subservice configuration mode with prompt to be
.
subservice-n)#
add protocol <protocol-name>
no add protocol <protocol-name>
Parameter
<protocol-name>
To enter subservice configuration mode and add signature-symbol
application HTTP to subservice 2, execute the following commands.
ZXR10(config-dpi)#subservice 2
ZXR10(config-dpi-subservice-2)#add protocol HTTP
Description
It is the relationship among signature symbol,
in form of string, indicating a series of
integers, separated by slash, such as 1/2/3/4.
All integers must be within the range of
signature symbol id, or configuration error
occurs.
It is optional. User can configure one name
for symbol-relation. User can use command
add protocol for next configuration.
Description
It is the name of specific protocol. By
executing command show support-protoc
ol, supported protocols can be seen, and then
add corresponding protocol.
ZXR10(config-dpi-
ZXR10(config-dpi-