Command Show Signature-Symbol - Zte ZXR10 8900 Series Command Manual

Command
Function
Command Mode
Command Format
Parameter
Description
Example
Command show
signature-symbol
This shows configuration of designated signature symbol. This
shows id of a signature entry bound under signature symbol.
All modes
show signature-symbol <signature-symbol-id>
Parameter
<signature-symbol-
id>
To show configuration of signature symbo 2, execute the following
command:
ZXR10(config-dpi)#show signature-symbol 2
signature-symbol-id hit-limit protocol-type signature-entry-num
--------------------------------------------------------------------
2
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Configuring Signature Symbol
Description
It is the id of signature symbol, ranging from
1 to 6143.
1 normal 1 add signature-entry: 2
13