Command Show Service - Zte ZXR10 8900 Series Command Manual

Command Mode
Command Format
Parameter
Description
Example
Command
Function
Command Mode
Command Format
Parameter
Description
Example
Service configuration mode with prompt to be
.
n)#
bind flow-pool <flow-pool-id>
no bind flow-pool
Parameter
<flow-pool-id>
To enter service configuration mode and bind flow-pool 12 with
service 2, execute the following commands:
ZXR10(config-dpi)#service 2
ZXR10(config-dpi-service-2)#bind flow-pool 12

Command show service

This shows service configuration. It also shows added subservices
and bound flowpool-id under this service.
All modes
show service <service-id>
Parameter
<service-id>
To show configuration of service 2, execute the following com-
mand:
ZXR10(config)#show service 2
service-id flowpool-id
------------------------------------------
2 0
add subservice-id: 10 20 27 30
------------------------------------------
import subservice:
------------------------------------------
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 6 Configuring Service
Description
It is id of flow pool entry, ranging from 1 to
2047.
Description
It is the id of service entry, ranging from 1
to 2047.
sub-service-num
4
ZXR10(config-service-
25