Network Cable Installation; Figure 82 Control Console Cable; Figure 83 Network Cable With Rj45 Connectors; Table 10 Connections Of Control Console Cable - Zte ZXR10 8900 Series Hardware Installation Manual

ZXR10 8900 Series Hardware Installation Manual
88 Confidential and Proprietary Information of ZTE CORPORATION
F 82 C C
IGURE ONTROL
The specific connection relationship is shown in
T 10 C
ABLE ONNECTIONS OF
End A (DB9 hole)
2
3
5

Network Cable Installation

Category-5 and hyper category-5 network cables are often used as
network cables. The technical specification of the cables is UTP CAT
5//15040 E-LINE 4PFR/PVC CAT.5. Technical parameters: 8-core
non-shielding structure at a transmission rate of 100M.
RJ45 plugs are crimped on both ends of the cable, as shown in
Figure 83.
F 83 N C
IGURE ETWORK
The name of the RJ45 jack is 8P8C straight through crimp jack with
the type of E5088-001023. Technical specifications are as follows:
� Rated current: 1.5A
�
Rated voltage: 125V
� Crimped with AWG24-28# round wire
Network cables can be classified into two types according to the
sequence of connectors.
C
ONSOLE ABLE
C C
ONTROL ONSOLE
Cable Chromatogram
Blue
Orange
White (Blue)
White (Orange)
RJ45 C
ABLE WITH ONNECTORS
Table 10.
C
ABLE
End B (DB9 hole)
3
6
4
5