Figure 71 Plugging Power Module Of Zxr10 8902 Step 1; Figure 72 Plugging Power Module Of Zxr10 8902 Step 3 - Zte ZXR10 8900 Series Hardware Installation Manual

F 71 P
IGURE LUGGING
1. Plug-in Box
2. Plug the power module to the end so that it touches the back-
plate connector, when the module is still in place. Push the
plastic panel of the module forcibly until the module is com-
pletely plugged into the plug-in box.
3. Screw down the captive screw on the bottom side of the
module to secure the connection between the module and the
plug-in box, Secure the socket connector connection between
the module and the back-plate, as shown in
F 72 P
IGURE LUGGING
1. Plug-in Box
2. Power Module
3. Captive Screw
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 Master Device Installation
P M ZXR10 8902 S
OWER ODULE OF
2. Power Module
P M ZXR10 8902 S
OWER ODULE OF
1
TEP
Figure 72.
3
TEP
75