ZXR10 8900 Series Hardware Installation Manual
Unplug a Card
70
Confidential and Proprietary Information of ZTE CORPORATION
F
65 P
IGURE
LUGGING
1.
Plug-in Box
2.
Card
Result: The card has been plugged.
To unplug a card, perform the following steps.
1. Loosen the captive screw on both sides of the card with a
screwdriver.
2. Press the card extractor with both hands. Turn the extractor
on both sides of the card outward. The card moves outward
when the connector is released.
3. Pull the card out along the guide rail.
Result: The card has been unplugged.
Installation of Power Supply
Module
Installing Power Supply Module of
ZXR10 8912/8908/8905
ZXR10 8912, ZXR10 8908 and ZXR10 8905 use the same power
supply module. Here, take ZXR10 8908 for an example to intro-
duce how to install power supply module.
C
S
5
ARD
TEP
3.
Captive Screw