Installation Of Fan Plug-In Box; Installing Fan Plug-In Box Of Zxr10; Figure 73 Plugging Fan Plug-In Box Step 1 - Zte ZXR10 8900 Series Hardware Installation Manual

ZXR10 8900 Series Hardware Installation Manual
Unplug Power
Supply Module
Plug Fan Plug-in
Box
76 Confidential and Proprietary Information of ZTE CORPORATION
Result: Power module of ZXR10 8902 has been plugged.
To unplug power module of ZXR10 8902, perform the following
steps.
1. Loosen the captive screw on the bottom side of the module.
2. Hold the both captive screw on both sides of the power module
with hands. Pull it outward forcibly until it is pulled out.
Result: Power module of ZXR10 8902 has been unplugged.
Installation of Fan Plug-in
Box

Installing Fan Plug-in Box of ZXR10

8912/8908/8905
The fan plug-in box used by ZXR10 8912, ZXR10 8908 and ZXR10
8905 are different in size, but which structures are the same.
Here, take ZXR10 8908 for an example to describe how to install
and remove fan plug-in box.
To plug fan plug-in box of ZXR10 8908, perform the following
steps.
1. Align the fan plug-in box with its slot, as shown in
Plug the box along the upper and lower guide rails.
F 73 P
IGURE LUGGING
1. Plug-in box
2. Fan Plug-in Box
3. Handle
2. When the connector on fan plug-in box touches the connector
on the back-plate, as shown in
F P - B S
AN LUG IN OX TEP
4. Captive Screw on the Fan
Plug-in Box
Figure 74, push the box inside
Figure 73.
1