Installing Fan Plug-In Box Of Zxr10 8902; Figure 74 Plugging Fan Plug-In Box Step 2 - Zte ZXR10 8900 Series Hardware Installation Manual

Result: Fan plug-in box of ZXR10 8908 has been plugged.
To unplug fan plug-in box of ZXR10 8908, perform the following
Unplug Fan
Plug-in Box steps.
1. Loosen the captive screws on the upper and lower side of the
2. Catch hold of the handle of the fan plug-in box and pull the box
Result: Fan plug-in box of ZXR10 8908 has been unplugged.
Installing Fan Plug-in Box of ZXR10
8902
To plug fan plug-in box of ZXR10 8902, perform the following
Plug Fan Plug-in
Box
steps.
1. Align the fan plug-in box with its slot, as shown in
continuously until it is in place. Secure the two captive screws
on the upper and lower sides of the box.
F 74 P F
IGURE LUGGING
1. Plug-in box
2. Fan Plug-in Box
3. Handle
fan plug-in box using a cross screwdriver.
out forcibly.
Plug the box along the upper and lower guide rails.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 Master Device Installation
P - B S
AN LUG IN OX TEP
4. Captive Screw on the Fan
Plug-in Box
2
Figure 75.
77