Installing Power Supply Module Of Zxr10 8902; Figure 70 Install And Remove Fake Power Supply Module - Zte ZXR10 8900 Series Hardware Installation Manual

ZXR10 8900 Series Hardware Installation Manual
Plug Power Supply
Module
74 Confidential and Proprietary Information of ZTE CORPORATION
F 70 I
IGURE NSTALL AND
1. Fake power supply module
2. Captive Screw
� Remove fake power supply module
Unplug card to leave enough space for using screwdriver be-
fore fake power supply module is removed. Remove the power
module guard, loose captive screw and fixed screw ((M3 × 8).
Pull fake power supply module out.
Installing Power Supply Module of
ZXR10 8902
To plug power module of ZXR10 8902, perform the following steps.
1. Align the power module with the module slot on the plug-in
box, as shown in
R F P
EMOVE AKE OWER
3.
Figure 71.
S M
UPPLY ODULE
Screw