Debug Module Configuration - Zte ZXR10 5250 Series Configuration Manual

ZXR10 5250 Series Configuration Guide

5.45 Debug Module Configuration

Introduction to the Debug Module
The Debug module is added for debugging the DHCP, dot1x, IP, ARP, and SNMP
protocols. This module configures the commands for locating faults in message sending
and receiving, message statistics, and procedure printing.
By using these commands, a user can easily trace the process of sending and receiving
messages, display statistical data of messages, and observe common printing errors.
Thus, the user can preliminarily position the faults, including protocol abnormality and
function failures.
Debug Module Configuration
The following commands need to be configured for the Debug module.
Command
zte(cfg)#
zte(cfg)#
zte(cfg)#
<0-63>
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
ion82 disable
zte(cfg)#
tion82 enable
zte(cfg)#
zte(cfg)#
<1/1-24>
zte(cfg)#
<1/1-24> clear
zte(cfg)#
<1-15>
zte(cfg)#
<1-15> clear
zte(cfg)#
SJ-20131111172707-002|2013-11-27 (R1.0)
debug protocol dhcp client disable
debug protocol dhcp client enable
debug protocol dhcp client state ipport
debug protocol dhcp download
debug protocol dhcp relay disable
debug protocol dhcp relay enable
debug protocol dhcp snooping-and-opt
debug protocol dhcp snooping-and-op
debug protocol dhcp statistics clear
debug protocol dhcp statistics port
debug protocol dhcp statistics port
debug protocol dhcp statistics trunk
debug protocol dhcp statistics trunk
debug protocol dhcpv6 disable
Function
Disables the debug function of the DHCP client.
Enables the debug function of the DHCP client.
Shows statistical data of an ip port on the DHCP
client.
Shows the downloaded information of the DHCP.
Disables the debug function of the DHCP Relay
module.
Enables the debug function of the DHCP Relay
module.
Disables the debug function of the DHCP
snooping-and-option82 module.
Enables the debug function of the DHCP
snooping-and-option82 module.
Deletes DHCP statistical data of all ports.
Shows DHCP statistical data of a port.
Deletes DHCP statistical data of a port.
Shows DHCP statistical data of a trunk port.
Deletes DHCP statistical data of a trunk port.
Disables the debug function of the DHCPv6
module.
5-160
ZTE Proprietary and Confidential