Setting External Lamp Controls - Avaya 2050 User Manual

Setting external lamp controls

Note: The external lamp is available on the desktop adapter only.
The Avaya 2050 IP Softphone supports an optional external LED lamp (also known as an in-use
lamp). The lamp provides visual indication of call status, headset connection, and messages
waiting.
You can set the lamp to illuminate under the following conditions:
• Manual Override
• Headset Disconnect
• Active Call
• Message Waiting
Select the cadence (how the lamp illuminates) that you want to use for each of the above
conditions. Available cadences include:
• None
• On
• Flash
• Flicker
• Blink
Manual Override
With Manual Override enabled, you can turn on the external lamp by pressing the Smart Functions
button on your USB Headset Adapter.
To enable Manual Override, select the cadence you want from the list. To disable Manual
Override, select None.
Headset Disconnect
With Headset Disconnect enabled, the external lamp activates when the headset registers as
disconnected from the USB Headset Adapter.
To enable Headset Disconnect, select the cadence you want from the list. To disable Headset
Disconnect, select None.
Active Call
With Active Call enabled, the external lamp activates when the Avaya 2050 IP Softphone registers
an active call.
To enable Active Call, select the cadence you want from the list. To disable Active Call, select
None.
Chapter 9 Avaya 2050 IP Softphone Settings
Avaya 2050 IP Softphone User Guide
65