Specifying Administrator Settings; To Specify Administrator Settings - Konica Minolta bizhub 250 User Manual

11
11.6

Specifying Administrator settings

From the Administrator Set screen, the administrator access code can be
changed or limits can be specified on the number of copies allowed.
The following procedure describes how to display the Administrator Set
screen and specify its settings.

To specify administrator settings

1
Display the Administrator Management 1 screen, and then touch [Ad-
min. Set].
– For details on displaying the Administrator Management 1 screen,
refer to "Displaying the Administrator Management screen" on
page 11-24.
The Administrator Set screen appears.
2
Select a parameter to be set.
3
Specify the desired settings, and then touch [Enter].
– To cancel changes to the settings, touch [Cancel].
– To exit the Administrator Set screen, touch [Enter] in each screen
until the Basics screen appears.
!
Detail
For details on specifying the "Restrict One-Touch Editing" and "One-
Touch" parameters, refer to the user manual [Facsimile Operations].
11-28
Utility mode
250/350