Konica Minolta bizhub 250 User Manual page 376

11
– To specify the hex value, touch
[HEX Selection], specify the value
by either using the keypad or
touching [A] through [F], and then
touch [Enter].
5
To change the setting for a different mode, repeat steps 3 and 4.
6
Touch [Enter] in each screen until the initial screen appears.
7
Turn the machine off, then on again.
Reminder
When turning the machine off, then on again, wait about 10 seconds after
turning the machine off before turning the machine on again. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.
11-52
Utility mode
250/350