Konica Minolta bizhub 250 User Manual page 386

12
Term
Erase
Finisher
Fold & Staple
Folding
Group
Image Repeat
Image Settings
Insert Image
Insert Sheet
Job
LCT
Low Power Mode
Margin
Memory Scan
Minimal
Mixed Original
12-6
Definition
Set this function to erase the unwanted parts of the document im-
age.
This unit sorts and finishes copies that have been fed out.
Set this function to fold the copies in half and staple them together
at the center.
Select the folding setting to specify how copies are folded. Depend-
ing on the finisher and other options that are installed, the "Crease"
and "Center Binding" settings are available.
Select this setting to separate the copies of each page in the docu-
ment. The specified number of copies of the second page is printed
after all copies of the first page are finished.
Select this setting to separate copies that are fed out.
Set this function to repeatedly print the image scanned from the doc-
ument to fill the entire page
Set the appropriate function to make copies with the desired image
added.
Set the "Set Numbering" function to print copies with a distribution
number in the background.
Set the "Stamp" function to print copies with one of the preset
stamps, such as "TOP SECRET", "COPY" or "PROOF".
Set the "Image Overlay" function to print copies overlapping a differ-
ent scanned image.
Set this function to later scan multiple images from the original glass
and insert them at the desired locations in a document scanned with
the ADF, then feed out all copies together.
Set this function to insert paper from the specified paper tray into the
copies as chapter title pages.
The copy operation that is queued on the machine while copying;
Multiple jobs can be queued on the machine.
Optional paper feed cabinet that can be loaded with up to 2,500
sheets of paper.
The machine automatically enters this mode, where it conserves en-
ergy, if no operation is performed for the specified length of time. In
this mode, the touch panel and the indicators for each key in the
control panel go off.
Select the setting for the position of the binding margin for the load-
ed document. Selecting the appropriate setting prevents the copy
from being printed upside-down when making double-sided copies
from single-sided documents or when making single-sided copies
from double-sided documents.
Scans a document exceeding the maximum 80 pages that can be
loaded into the ADF by scanning the document in separate batches.
The document can be scanned and treated as a single copy job. In
addition, the scanning location can be switched between the original
glass and the ADF during the scanning operation.
Select this setting to produce a copy with the original image slightly
reduced.
Select this setting to detect the size of each document page and
print a copy on paper of the appropriate size when a document with
different page sizes is loaded together into the ADF.
Appendix
250/350