Erasing Unwanted Areas Of Copies ("Edge/Frame Erase" Function); To Copy Using The "Edge/Frame Erase" Function - Konica Minolta bizhub 250 User Manual

Application functions
8.5 Erasing unwanted areas of copies ("Edge/Frame
Erase" function)
Copies can be produced by erasing unwanted areas around the document,
such as the transmission information on received faxes and the shadows of
punched holes.

To copy using the "Edge/Frame Erase" function

1
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the doc-
ument" on page 3-8.
2
Touch [Application], and then touch
[Edge/Frame Erase].
The Edge/Frame Erase screen ap-
pears.
3
Specify the area to be erased.
– Touch the button for erasing the
left side, the top, or a surrounding
frame.
– To cancel the "Edge/Frame
Erase" function, touch [OFF].
250/350
A
A: 5 mm to 10 mm
8
8-13