Specifying Administrator Settings; System Setting - Konica Minolta bizhub 750 User Manual

Utility
12.4

Specifying Administrator Settings

This section describes the main parameters and operations that can be per-
formed after pressing the [Utility/Counter] key, then touching [3 Administra-
tor Setting].

System Setting

Power Save Setting
Parameter
Low Power Mode Set-
ting
Sleep Mode Setting
Power Save Key
Entering Power Save
Mode (Fax)
Output Setting
Parameter
Print/Fax Output Set-
tings
Exit Tray Setting
bizhub 750/600
Description
Specify the desired length of time until
the machine enters Low Power mode.
Specify the desired length of time until it
enters Sleep mode.
Select which low power mode is entered
when the [Power Save] key is pressed.
• Low Power:
The touch panel goes off and the ma-
chine enters a mode where it con-
serves energy.
• Sleep:
Although the machine conserves
more energy in Sleep mode than in
Low Power mode, the machine must
warm up when Sleep mode is can-
celed, therefore taking more prepara-
tion time than Low Power mode.
Specify settings for faxing. For details, refer to the Facsimile Opera-
tions and the Network Fax Operations of the bizhub 750/600 User's
Guide.
Description
Specify settings for printing. For details, refer to the IC-202 User's
Guide.
Select the copy exit tray for each type of
job (copies, printouts and reports).
12
Settings (Default set-
tings are underlined.)
1 to 240 minutes: 15
minutes
OFF/ 1 to 240 minutes:
60 minutes
Low Power/ Sleep
Settings (Default set-
tings are underlined.)
Copy: Main Tray/ Sub
Tray
Printer: Main Tray/ Sub
Tray
Reports Print: Main Tray/
Sub Tray
12-31