Basic copy operation
Adjusting the copy density (Density settings)
0 The default setting is the middle of the five levels. When the "Auto" set-
ting is selected, the "Std." Density setting is set.
0 The default Density setting and the density selected when the "Auto" set-
ting is selected can be changed from the Utility mode. For details, refer
to "Default Copy Output Levels" on page 11-16.
1
In the Basics screen, touch [Quality/
Density].
The Quality/Density screen appears.
2
Select the desired Density setting.
–
Each time [Light] or [Dark] is
touched, the density is lightened
or darkened by one level.
–
Touch [Auto] to automatically ad-
just the density according to the
document that is loaded.
250/350
3
3-43