Konica Minolta bizhub 250 User Manual page 223

Troubleshooting
Symptom
The image is not aligned
properly on the paper.
The printed page is curled.
The edge of the printed
output is dirty.
250/350
Possible cause
Is a double-sided docu-
ment being copied?
Is the document incor-
rectly positioned?
Is the document incor-
rectly positioned in the
ADF?
Is the original glass dirty
(while using the ADF)?
Are the adjustable docu-
ment guides incorrectly
positioned against the
edges of the document?
Was curled paper loaded
into the paper tray?
Was paper that curls
easily (as with recycled
paper) used?
Is the document pad
dirty?
Was the selected paper
size larger than the docu-
ment (with a Zoom set-
ting of "×1.0")?
Is the orientation of the
document different from
the orientation of the pa-
per (with a Zoom setting
of "×1.0")?
Remedy
If a thin double-sided docu-
ment is being copied, the
print on the back side may
be reproduced in the copy.
Select the "Dot Matrix" Den-
sity setting. (See page 3-41.)
Correctly position the docu-
ment against the document
scales. (See page 3-10.)
Load the document into the
ADF, and slide the adjusta-
ble document guides to fit
the size of the document.
(See page 3-8.)
If the document cannot be
fed correctly through the
ADF, make copies by posi-
tioning the document on the
original glass. (See
page 3-10.)
Wipe the glass with a soft,
dry cloth. (See page 10-3.)
Slide the adjustable docu-
ment guides against the
edges of the document.
Flatten the paper before
loading it.
Remove the paper from the
paper tray, turn it over, and
then load it again.
Replace the paper with pa-
per that is not damp.
Clean the document transfer
belt with a soft cloth damp-
ened with a mild detergent.
(See page 10-4.)
Select a paper size that is
the same size as the docu-
ment.
Otherwise, select the "Auto
Zoom" setting to enlarge the
copy to the selected paper
size. (See page 3-27.)
Select a paper size that is
the same size as the docu-
ment. Otherwise, select a
paper orientation that is the
same as that of the docu-
ment.
5-29
5