Konica Minolta bizhub 250 User Manual page 140

3
3
Touch [Individual Zoom].
The Individual Zoom screen appears.
4
Using the keypad, type in the desired
zoom ratios for side X and side Y (be-
tween ×0.250 and ×4.000).
– If a value outside the allowable
range is specified, the message
"Input Error" appears. Type a val-
ue within the allowable range.
– If the value was incorrectly en-
tered, press the [C] (clear) key in
the keypad to erase the value, and then specify the correct value.
5
Touch [Enter].
The Zoom screen appears again.
3-34
Basic copy operation
250/350