Specifying Administrator Settings; System Settings - Konica Minolta bizhub C550 User Manual

Utility mode
11.4

Specifying administrator settings

This section describes the function and main registration parameters that
can be specified after pressing the [Utility/Counter] key, then touching
[Administrator Settings].

System Settings

Power Save Settings
Parameter
Low Power Mode
Settings
Sleep Mode Set-
tings
Power Save Key
Enter Power Save
Mode
Output Settings
Parameter
Print/Fax Out-
put Settings
Output Tray
Settings
Shift Output
Each Job
Reminder
The "Output Tray Settings" parameter is available only if the optional
finisher is installed.
C550
Description
Specify the desired length of time (between 10 and
240 minutes) until the machine enters Power Save
mode.
Specify the desired length of time (between 15 and
240 minutes) until the machine enters Sleep mode.
Select which low power mode is entered when the
[Power Save] key is pressed.
• Low Power:
The touch panel goes off and the machine enters
a mode where it conserves energy.
• Sleep:
Although the machine conserves more energy in
Sleep mode than in Power Save mode, the ma-
chine must warm up when Sleep mode is can-
celed, therefore taking more preparation time
than Power Save mode.
Specify settings for faxing. For details, refer to the
User's Guide [Fax Operations] and the User's Guide
[Network Fax Operations].
Description
Specify settings for faxing and printing. For details, refer to the User's Guide [Fax
Operations] and the User's Guide [Print Operations].
Select the finishing tray for each type of job (copies, print-
outs, faxes and reports).
Select whether or not printed copies are fed out shifted
when "Offset" is selected while optional finisher is in-
stalled.
• Yes: Pages are fed out shifted.
• No: Pages are fed out without being shifted.
11
Default Setting
15 minutes
30 minutes
Low Power
Normal
Default Setting
Copy: Tray 1
Printer: Tray 1
Print Reports: Tray 2
Fax: Tray 2
Yes
11-31