Separating Copies By Sets ("Sort" Setting) - Konica Minolta bizhub 250 User Manual

3

Separating copies by sets ("Sort" setting)

0 The factory default setting is "Non-Sort".
0 If "Sort" is selected while no finisher is installed, printed copies will be fed
out and sorted in an alternating crisscross pattern if the following condi-
tions are met.
- A4 or B5 paper is used.
- Paper of the same size and type is loaded with the w orientation in one
paper tray and with the v orientation in another tray.
- The "Auto Paper Select" setting is selected.
- The "Mixed Original" setting is not selected.
- The "Cover Mode" and "Insert Sheet" functions are not set.
- The "Image Repeat" function is not set.
If "Sort" is selected and the finisher is installed, copies are fed out shifted
to separate them.
1
In the Basics screen, touch [Finish-
ing].
The Finishing screen appears.
2
Touch [Sort].
3-52
Basic copy operation
250/350