Utility mode
11.9
Specifying user authentication settings
User authentication can be performed by the external server or by the ma-
chine. With external server authentication, usage by users can be controlled.
With machine authentication, a password can be specified and the total
counters can be controlled for each user.
To display the User Authentication screen
0 [User Auth. Setting] appears only when the "User Authentication" param-
eter is set to "External Server" or "Authentication". For details, refer to
"Specifying the account/authentication settings (General Setting param-
eters)" on page 11-30.
0 A maximum of 100 users can be registered on this machine.
1
Display the Administrator Management 1 screen, and then touch [Ac-
count/User Auth.].
–
For details on displaying the Administrator Management 1 screen,
refer to "Displaying the Administrator Management screen" on
page 11-24.
The Account/Authentication screen appears.
2
Touch [User Auth. Setting].
–
To exit the User Authentication
screen, touch [Enter] in each
screen until the Basics screen
appears.
250/350
11
11-39