To Manage An Account - Konica Minolta bizhub 250 User Manual

Utility mode

To manage an account

The settings for registered accounts can be changed and the counters can
be controlled.
1
Display the Account Data screen, and then select the desired account
number.
– For details on displaying the Detail screen for an account, refer to
"Specifying account data settings" on page 11-33.
The Detail screen appears.
2
Select the desired settings.
– Touch [General Settings] to dis-
play the Account Registr. screen,
and then change the settings.
– For details on changing settings
in the Account Registr. screen,
refer to "To register an account"
on page 11-35.
– Touch [Clear Counter] to display
a message confirming that the counters will be reset. To reset all
counters for the selected account to 0, touch [Yes].
– Touch [Counter] to display the
Counter screen, which contains
the counters for the selected ac-
count.
– In the Counter screen, touch
[Fwd] to display the next screen,
or touch [Back] to display the
previous screen.
3
Touch [Exit], and then touch [Enter] in
the next screen that appears.
– To exit the Account/Authentica-
tion screen, touch [Enter] in each screen until the Basics screen ap-
pears.
The screen for selecting an account number appears again.
Note
In the screen for selecting an account number, touch [Reset All
Counters], then [Yes], and then touch [Enter] to reset all counters for all
accounts to 0.
250/350
11
Counter screen
11-37