Basic copy operation
To bind copies with staples
1
In the Basics screen, touch [Finish-
ing].
The Finishing screen appears.
2
Touch either [Corner Staple] or [2
Staples].
–
If "Corner Staple" is selected, the
copies are bound together with a
staple in the upper-left corner.
–
If "2 Staples" is selected, [Posi-
tion Setting] appears in the
screen. To select the binding po-
sition, continue with step 3.
–
If a staple setting is selected, the [Sort] setting is automatically se-
lected.
–
To cancel the staple setting, touch [Corner Staple] or [2 Staples]
again to deselect it.
3
Touch [Position Setting], and then
select the desired position.
–
Touch [Auto] to automatically de-
termine the binding position ac-
cording to the orientation of the
loaded document.
4
Touch [Enter].
The Finishing screen appears again.
250/350
3
3-55