Overview Of Utility Mode Parameters; List Of Registration Information And Parameters - Konica Minolta bizhub 250 User Manual

Utility mode
11 Utility mode
11.1

Overview of Utility mode parameters

List of registration information and parameters

This section describes the buttons available when the [Utility/Counter] key is
pressed.
Note
The buttons that appear in the screens differ depending on the specified
settings.
Buttons marked with*
tings or whether specific options are installed. For details, refer to the
corresponding page for the button.
The names of buttons marked with
stalled.
For details on the buttons marked with
simile Operations].
For details on buttons marked with
Scanner Operations].
For details on buttons marked with
erations].
For details on the buttons marked with
Operations].
[Reports] (marked with*7) appears if fax kit is installed or if the "Mainte-
nance Mode" parameter is set to "ON". For details on "Maintenance
Mode", contact your technical representative.
If user authentication settings have been specified and the [Utility/Coun-
ter] key is pressed without performing user authentication, only the but-
tons marked with
250/350
1
may not appear depending on the specified set-
*2
*4
*5
*8
appear.
may be different when fax kit is in-
*3
, refer to the user manual [Fac-
, refer to the user manual [Network
, refer to the user manual [Print Op-
*6
, refer to the user manual [Box
11
11-3